Contributing to Meshery Docs

Before contributing, please review the Documentation Contribution Flow. In the following steps you will set up your development environment, fork and clone the repository, run the site locally, and finally commit, sign-off, and push any changes made for review.

Meshery Documentation Design Specification

See the Meshery Documentation Design Specification which serves to provide an overview of the tooling and approach used to create Meshery’s documentation and it information architecture.

Documentation Framework

Meshery documentation is made of these components:

Framework - Jekyll
Theme - https://github.com/vsoch/docsy-jekyll
Repo - https://github.com/layer5io/meshery/tree/master/docs
DNS - https://meshery.layer5.io/docs
AWS API GW - an instance is configured to redirect from docs.meshery.io to meshery.layer5.io, because of the repo location of where the docs currently reside.

Set up your development environment

Jekyll

The Meshery Docs site is built using Jekyll - a simple static site generator. Jekyll can be installed on different platforms like Windows, Linux, and MacOS by the following steps

For Windows

Note: Windows users can run Jekyll by following the Windows Installation Guide and also installing Ruby Version Manager RVM. RVM is a command-line tool which allows you to work with multiple Ruby environments on your local machine. Alternatively, if you’re running Windows 10 version 1903 Build 18362 or higher, you can upgrade to Windows Subsystem for Linux WSL and run Jekyll in Linux instead.

Fire up your WSL VM and install the ruby version manager (RVM):

  sudo apt update
  sudo apt install curl g++ gnupg gcc autoconf automake bison build-essential libc6-dev \
    	libffi-dev libgdbm-dev libncurses5-dev libsqlite3-dev libtool \
    	libyaml-dev make pkg-config sqlite3 zlib1g-dev libgmp-dev \
    	libreadline-dev libssl-dev
  sudo gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
  curl -sSL https://get.rvm.io | sudo bash -s stable
  sudo usermod -a -G rvm `whoami`

If gpg --keyserver gives an error, you can use:

  sudo gpg --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3

  sudo gpg2 --keyserver hkp://pool.sks-keyservers.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3 7D2BAF1CF37B13E2069D6956105BD0E739499BDB

Restart your WSL VM before moving forward.

For installing Ruby, run:

  rvm install ruby
  rvm --default use ruby 2.7.1
  gem update
  gem install jekyll bundler

For Linux

Prerequisites

  sudo apt-get update
  sudo apt-get install autoconf bison build-essential libssl-dev libyaml-dev libreadline6-dev zlib1g-dev libncurses5-dev libffi-dev libgdbm3 libgdbm-dev

Installing rbenv

Cloning the rbenv repository
```
  git clone https://github.com/rbenv/rbenv.git ~/.rbenv
```
Note: Change bashrc with your shell specific rc file, for eg: if you are using zsh then the filename is zshrc.

Setting the path

  echo 'export PATH="$HOME/.rbenv/bin:$PATH"' >> ~/.bashrc

rbenv init

  echo 'eval "$(rbenv init -)"' >> ~/.bashrc

Reload your bashrc
```
  source ~/.bashrc
```
Check installation
```
  type rbenv
```

Install Ruby

rbenv install version

  rbenv install 2.7.5

To list all the versions that can be installed

  rbenv install --list-all

Set which Ruby version you want to use

  rbenv global version

Check Ruby installation

  ruby -v

For MacOS

Use docs here Jekyll installation

Get the code

Fork and then clone the Meshery repository

$ git clone https://github.com/YOUR-USERNAME/meshery

Change to the docs directory
```
$ cd docs
```
Install any Ruby dependencies
```
$ gem install bundler
$ bundle install
```
Note: If you are a Mac user you do not need to install the Ruby dependencies, after moving on to the docs directory, you can serve the site.

Serve the site

Serve the code locally
```
$ make site
```
If that gives an error run:
```
$ bundle exec jekyll serve --drafts --config _config_dev.yml
```
From the Makefile, this command is actually running $ bundle exec jekyll serve --drafts --livereload --config _config_dev.yml. If this command causes errors try running the server without Livereload with this command: $ bundle exec jekyll serve --drafts --config _config_dev.yml. Just keep in mind you will have to manually restart the server to reflect any changes made without Livereload. There are two Jekyll configuration, jekyll serve for developing locally and jekyll build when you need to generate the site artefacts for production.

Using Docker

If you’ve Docker and make installed in your system, then you can serve the site locally

$ make docker

This doesn’t require the need for installing Jekyll and Ruby in your system

But, you need to make sure that GNU make is working in your system (might not work in Windows)

Note

While performing the above step, if you’re facing errors with a message like below…

Your ruby version is x.x.x but your Gemfile specified 2.7.x

This is because Jekyll always considers the exact version of Ruby unlike JavaScript.

So, you need to follow either of the three steps to resolve this problem;

Install the required Ruby version by using rvm or by any means given above
Alternatively, if you have Docker installed, then type make docker-docs to view the changes
If you’re unable to install the required Ruby version, then manually configure the Gemfile as below (not recommended! Do only if above two steps fail):

source "https://rubygems.org"
ruby '2.7.1' //to any version you have installed

Automatically the Gemfile.lock will update once the make site is given (for Windows, run bundle exec jekyll serve if WSL2 isn’t present)

WARNING: If you have followed the third step then please don’t commit the changes made on Gemfile and Gemfile.lock in your branch to preserve integrity, else the CI action will fail to generate the site preview during PR.

Make Necessary Changes

Make changes as required by the issue you are solving
Be sure check that your changes appear correctly locally by serving the site using make site

Note

If the issue requires making new doc page that replaces the old page, please don’t forget to add a redirect link on the old page. This redirect link field should have the link of the new page created.

Create a Pull Request

After making changes, don’t forget to commit with the sign-off flag (-s)!
```
$ git commit -s -m “my commit message w/signoff”
```
Once all changes have been committed, push the changes.
```
$ git push origin <branch-name>
```
Then on Github, navigate to the Meshery repository and create a pull request from your recently pushed changes!

See the Meshery Documentation Google Doc for additional reference.

Using the features of Meshery Docs

Clipboard Feature

Most popular clipboard plugins like Clipboard JS require the manual creation of a new ID for each code snippet. A different approach is used here. For code snippets, we either use html tags or markdown in the following manner:

   <pre class="codeblock-pre"><div class="codeblock">
   <code class="clipboardjs">
     code snippet
   </code></div></pre>

<pre></pre> tags are optional unless the code snippet is in a paragraph format and also gives a terminal like effect to the code

A full block:

```code snippet```

Inline formatting:

`code snippet`: code snippet

Language specific:

```(language name)
  code snippet
```

Whenever the code tags are detected, the clipboard javascript file is automatically loaded. Each code element is given a custom id and a clipboard-copy icon to copy the content.

Documentation Contribution Flow Summary

NOTE: For contributing mesheryctl reference section, refer Contributing CLI

The following is a concise summary of the steps to contribute to Meshery documentation.

Create a fork, if you have not already, by following the steps described here
In the local copy of your fork, navigate to the docs folder. cd docs
Create and checkout a new branch to make changes within git checkout -b <my-changes>
Edit/add documentation. vi <specific page>.md
Add redirect link on the old page (only when a new page is created that replaces the old page)
Run site locally to preview changes. make site
Commit, sign-off, and push changes to your remote branch. git push origin <my-changes>
Open a pull request (in your web browser) against the repo: https://github.com/layer5io/meshery.

Table of Contents in Sidebar (toc)

Sidebars use toc to create a table of contents. It is written in the following manner:

    toc:
  - title: Group 1
    subfolderitems:
      - page: Thing 1
        url: /thing1.html
      - page: Thing 2
        url: /thing2.html
      - page: Thing 3
        url: /thing3.html

The output of the code snippet would be:

    Group 1
      Thing 1
      Thing 2
      Thing 3

`if` condititional

This executes the block of code only if the given condition is true. It is executed in the following manner:

    {% if product.title == 'Awesome Shoes' %}
    These shoes are awesome!
    {% endif %}

If the condition is true, the output would be:

    How are you?

`for` loop

The for statement executes a block of code repeatedly. It is wriiten in the following manner:

    {% for names in collection.names %}
    {{ name.title }}
    {% endfor %}

The output produced by the above code snippet:

    Sam Ham Ethan

Comment

Comments allow to leave a block of code unattended, any statements between opening and closing comment would not be executed.

Include

The above tag is used to insert a already rendered file within the current template. It is written in the following manner:

    {% include file.html %}

Assign

The assign tag is used to create a new variable. It is written in the following manner:

    {% assign variable1 = true %}

Contributing to Meshery Docs

Meshery Documentation Design Specification

Documentation Framework

Set up your development environment

Jekyll

For Windows

For Linux

Installing rbenv

Install Ruby

For MacOS

Get the code

Serve the site

Using Docker

Note

Make Necessary Changes

Note

Create a Pull Request

Using the features of Meshery Docs

Clipboard Feature

Documentation Contribution Flow Summary

Table of Contents in Sidebar (toc)

if condititional

for loop

Comment

Include

Assign

Suggested Reading

`if` condititional

`for` loop